- Posted by Haroun Arif
- On June 26, 2018
Dial @ 045864029 to improve Wifi Speed of your Laptop, F2 Help have expert technician team to fix all issues which block your laptop internet speed
Here are the Top 10 tricks to boost the signal strength on Laptop
Imagine a situation where you have the latest laptop and a good quality router for WIFI connection, but still, you face speed issues. It is apparent that you will get annoyed and pull your hair out to understand what is going wrong! However, this will not help you, but my ten technics will definitely boost your WIFI speed up to a great extent. As compared to a cellphone, the laptop has a more powerful WIFI to get better signals as well as speed, but sometimes it is possible that even sitting at the closest possible place you won’t get a good signal strength. Now if you are also sailing in the same boat then get ready to dock it and board a jet of WIFI speed. While applying my methods, you have to be precise in following all the steps as a single deviation will lead to total failure.
Method 1: Replace the Standard Router Antenna
Sometimes a standard router antenna fails to distribute the signal in all directions. Here you can use omnidirectional antennas which will resolve this issue. It can also help you in pointing your signals to an area where you are sitting. The cost of this device is not on a higher side. You can buy it easily, and the installation is also simple.
Method 2: Use a wireless amplifier
Also known as a repeater and range expander, you can try a wireless amplifier to strengthen the WIFI signal. It retransmits the signals from a router for enhancing speed as well as strength. All you have to do is place the repeater near the router so that you can fully utilize its power. By rebroadcasting the signal, it will cover all other areas so that they can also have a good quality connection.
Method 3: Change the Wireless Channel
A channel is a frequency through which the Wi-Fi transmits and receives data. On a single channel, you can find many devices attached. Sometimes due to interferences, it may not work correctly, and there are majorly three reasons due to which such problem can arise which are as follows:
- Co-channel: Every client and access point on the same channel competes for time to talk
- Adjacent-channel: Every client and access point on overlapping channels talks over each other
- Non-WIFI: Non-802.11 devices compete for medium access.
Co-Channel interference can be handled easily s it occurs when too WIFI devices are on the same channel. When it comes to Adjacent-Channel interference, then you can face some issues. However, all these problems can be resolved by choosing some other channel. By using a spectrum analyzer such as SSIDer Office, you can see the wireless environment and can select a right channel or mitigate WIFI interference which will ultimately improve your 2.4 GHz WIFI network performance.
Method 4: Upgrade the WIFI Router
We keep on trying various options for enhancing speed but forgets that an outdated router can be a reason behind poor signal strength and low speed. If we talk about the latest laptops, then every device is using 802.11g or 802.11n Wi-Fi circuitry which helps in utilizing WIFI networks in a better way. Check your router and see if it is an 802.11b device or not. If yes, then upgrade it so that it can deliver you high speed.
Method 5. Install the External WIFI Adaptor
Every laptop has a built-in WIFI circuit and antenna. When your device gets old, it also loses its efficiency of providing you excellent speed and WIFI signals. In such a case, you can use external WIFI adapters. First, you have to disable the built-in WIFI circuit and antenna and then install an external WIFI adaptor. It has a high antenna and is built by the latest technology that can drastically enhance the WIFI signal for your laptop.
Method 6. Reposition the router
Due to looks and wires people generally, don’t prefer to put the routers at a location where they can come into sight. Usually, they are hidden behind a curtain, table or sofa. However, this is the worst thing to do as the more obstruction it will face, the more your speed will get low. Ideally, a router should be placed in the center of your house at the highest point. It should not come across blocking furniture so that your signal does not congest. To further enhance the speed you should also avoid putting your router near to any electronics or metal surface that use signals such as microwave, remote control doors, etc.
Method 7: Disable the Network Hogs
Network hogs are those applications that leech on your data even when you are not using it. Here to track such apps you can use the task manager of any program to check which apps are running in the background. After finding them, disable unused applications. This action will increase the speed of the net as well as it will enhance the performance of your laptop.
Method 8: Put Transmission Power at the Highest level
Sometimes low speed and signal strength issues can be resolved by adjusting transmission power. To do it you have access and utilize adapter’s drive interface or program. Look for the option of transmission power and select the highest level of it amongst given alternatives. However, you have to keep this in mind that whenever your system goes on power-saving mode, then it will automatically reset all the settings.
Method 9: Use DD-WRT
There is some software through which you can enhance the performance of router such as DD-WRT. It is open-source software for routers which specializes in ramping up router performance, and It also helps in extending the current features. It is one of the good solutions, but you can not apply it on all routers as all models do not support this software. It can also invalidate the router’s warranty and furthermore many technicians will refuse to troubleshoot your router issues once you use DD-WRT on it.
Method 10: Check for firmware updates and apply them
Your Wi-Fi router and adapter work on firmware which helps in establishing the connection and offer WIFI. Sometimes due to an old version of firmware, you can face the issue of low speed and weak signal strength. Here you need to check available updates for your Wi-Fi router or adapter frequently. If you find any latest version, then download it and update your drivers as soon as possible. New updates generally help in fixing such problems and provide many connectivity solutions.
These were some hacks or tricks which you can use to get better signals and WIFI speed. However, sometimes you can also face such issues due to some other reasons such as physical damage or logical damage to the unit. In such a situation only an expert who has relevant skills and knowledge will be able to help you. In case if you are searching for options in Dubai, then there is one brand that provides class apart services, and that is F2 Help. They provide prompt services along with quality solutions. They have multiple centers in different locations of Dubai which makes them available to users within minimum time. All you need to do is make a call on their toll-free number and get assistance. They also provide free estimates which can come handy when you choose a service provider.