Attempts You Can Make on Your Own before a Beats Headphone Repair
- Posted by Haroun Arif
- On December 19, 2019
- 0
The headphone has become an essential device for our day-to-day life. You can use headphones for listening to music, videos, or movies without disturbing others. It makes communication easier when you are in a crowd. But, the problem arises when you are having difficulties using your headphones. If your headphones have minor problems, then you can easily fix them with basic troubleshooting. And you will get these troubleshooting tips from this piece of information. However, you must opt for a Beats headphone repair to fix critical issues.
Fix Problems with Beats Headphone: Easy Hacks to Apply
We have discussed and solved the problems reported to occur with Beats Headphones.
Problem 1: Can’t Connect with Wireless Beats Headphones
Sometimes you might fail to connect your device with the wireless Beats Headphones. In this situation, you can try out the following fixes:
Check the Location
Make sure to keep your device within a range of 30 feet from your Beats headphones. Also, move your device away from Bluetooth devices, microwaves, wireless routers, and other electronics.
Reset the Sound Settings
If you are using an iOS device, then open the Settings app and choose the Bluetooth option. Select your Beats headphones and tap the ‘OK’ button to reset the settings.
If you are a Mac user, then go to the Apple menu and choose ‘System Preferences.’ Tap ‘Sound’ and select your Beats headphones in both the input and output panes.
On Windows, launch the Settings app from the Start menu. Then select the Beats headphone as your playback or recording device.
After making the aforesaid changes, play some music to ensure that the Beats headphone can recognize your device. If the headphone remains unidentified, then repair Beats headphones from a nearby service center.
Check the Volume
- Make sure that your device is fully charged and connected to your Beats headphone.
- Check your device for a downloaded track that doesn’t stream audio.
- Then, play the particular track and increase the volume both on your device and the beats headphone.
- You will hear the track if Beats headphones is successfully connected to your device.
Use Forget Device and Pair Your Headphone Again
- First, disconnect your Beats headphones from your device and open the Settings app.
- Tap ‘Bluetooth’ and select ‘i’ next to your Beats headphone.
- Click the ‘X’ button and select the ‘Forget Device’ option under.
- Now, pair your Bluetooth wireless headphones again.
Reset Your Beats Headphone
For Solo Pro, press and hold the Mode and Volume button for about 10 seconds. Release these buttons as the LED light flashes. It then indicates that your headphone is ready to connect with your device again.
If you have Studio3 Wireless, then hold down the Power and Volume buttons simultaneously. Release the button as the Fuel Gauge flashes. Now, plug in the Beats headphone to your device and check the sound of any audio.
If you are having problems with Studio or Studio wireless, then press and hold the Power button for a few seconds. Release the Power button when the Fuel Gauge LEDs blink white. An LED blinks red and then all the LEDs blink white. This sequence will continue three times and finally, the LED lights will stop flashing. The reset process is now complete and you can use your Beats headphone as before.
If you are having trouble with Beats Solo3 Wireless, then reset the headphone. To do so, hold down the Volume down and Power buttons at the same time on your Beats headphone. Release these buttons when the Fuel gauge flashes. Then, set up the headphone with your device and check the audio.
So, if you are looking forwards to Reset Solo2 Wireless, then unplug your headphone from any USB charging cable. Hold down the Power button and release it once the Fuel Gauge LEDs blink white. Then, one LED will blink red and follow the sequence. Your headphone is reset when the LED lights are no longer flashing.
Finally, if you are having Solo wireless, then turn off the headset. Press and hold the malfunction and Volume down buttons eight seconds. The red and blue indicator light will flash alternatively three times and reset the headphone.
Problem 2: Crackling Audio When Headphones Connected
If you are unable to get any clear audio, then go by the following steps:
- Check whether the 3.5 mm audio jack is fully plugged in or not.
- If not, then connect the straight input to your headset and the L shaped input to your device.
- Turn on your device and play a track.
- If the audio source is a computer or laptop, then reset their configuration settings.
- If you hear distorted sounds, then change the audio source and cable.
If the volume keeps snapping or popping, then connect with a Beat headphone service provider. Perhaps the headphone cable or speakers are damaged. Hence, you must get your Beats headphone repaired from a reputed service center.
Problem 3: No Sound on One Side
If you are getting sound from one speaker of your headphones and the other one is idle, then it might be occurring due to a jammed headphone jack. Therefore, clean the moisture accumulated inside the headphone jack. If you don’t know the cleaning process, then connect with experts.
If the headphone jack is not the source of this problem, then download the updater app for your beats headphone. Then install the app and run it on your device or computer. After that, download and install the latest firmware for your device/computer.
Note: There will be separate updates for Windows and iOS devices.
Problem 4: Compatibility Issues
The headphones won’t work if it is not compatible with your device. Thus, you need to install the latest software updates on your device. So, update the OS and restart your device. Then, connect back the headphone to your device and play any music to test the condition.
Remember that Beats headphones might have limited functionality if your device does not run iOS.
Problem 5: Volume Problems
If the microphone of your headphone doesn’t pick up sounds, then apply the steps as discussed below:
- Clean the headset jack on your device and securely connect the headphone to it.
- The microphone should not be blocked with anything.
- Connect the straight end of the plug to your Beats headphone and the angled L-shaped plug to your device.
- If you have connected the Beats headphones to your computer, then set the computer microphone to the correct input source.
If nothing happens after trying out the above process, then test the headphone on another device or computer. The problem will disappear if it was associated with your device and not the headphone.
Frequently Asked Questions:
- What are the Possible Causes of Beats Headphone Problems?
The headphone won’t work if the headphone jack is damaged. The headphone cable is damaged or the speakers are faulty can be effective reasons for this problem to occur. Moreover, the Bluetooth connectivity issue can be the primary cause of problematic wireless headphones. Apart from this, software issues can be another possible source of your headphone problems.
- How to Fix a Beats Headphone that is Not Working?
First, remove the unwanted connections from your device and computer. Check USB compatibility if your headphone needs a USB to access your device. Don’t connect your headphone to a low wattage device otherwise, the performance of your audio might suffer. Don’t forget to turn on the Bluetooth for using wireless headphones. If your headphone has built-in Bluetooth buttons, then use them to check the issue. Make sure that you have successfully connected your Headphones to your device. Or else, your device might be sending the audio to another Bluetooth device.
0 comments on Attempts You Can Make on Your Own before a Beats Headphone Repair